Downloads

Sales Drawings

 

Contact us

Click here to contact us »

M951

Description

5/8-18  x  4.5" - 3 Pin
Active (Powered) - Ordinary Area
Zero Speed Hall-Effect Sensors

This hall effect sensor is designed to sense ferrous material (gear teeth, hole or pin) for speed measurement down to zero-speed. The digital output is compatible with most PLC input cards. This sensor has a long reach (4.500 inches) and a 5/8-18 thread.

 

Need to find a Dynalco Rep?
Click here to find a local Dynalco Rep

 

Features

SPECIFICATIONS:

  • POWER SUPPLY: 8 TO 32VDC.
  • SUPPLY CURRENT: 30 mA MAXIMUM
  • OPERATING TEMPERATURE: -30 F TO +250 F (-35 C to 125 C)
  • SENSED FREQUENCY: 0 TO 20 KHZ
  • OUTPUT VOLTAGE: SQUARE WAVE.
  • LOGIC 0: WHEN NEAR FERROUS MATERIAL, ACTIVATES SENSOR.
    * +0.5V AT ≤ 50mA.
  • LOGIC 1: WHEN NO FERROUS MATERIAL PRESENT
      * FOR Vin ≤ 24V USE A PULL UP RESISTOR ≥ 1KΩ
      * FOR Vin ≤ 16V USE A PULL UP RESISTOR ≥ 330Ω
  • INSULATION RESISTANCE: 100 MEGAohm MIN. AT 50 VDC (COMMON TO HOUSING)
  • HOUSING: 303 STAINLESS STEEL, BLIND END.