Highly Accurate and Rugged Speed Sensors

Dynalco Magnetic Pickups with CSA & ATEX Approvals for use in industrial applications

Dynalco magnetic pickups convert mechanical motion to ac voltage without mechanical linkage or external power. These self-contained transducers produce a magnetic field which, when altered by a moving ferrous object, generates an ac voltage. It assumes a material that is attracted to a magnet, such as the pole piece of a magnetic pickup.

When the pickup is mounted in proximity to the teeth of a gear on a rotating shaft, the generated voltage has a frequency in direct proportion to RPM. Although a gear is preferable, a proper signal may be derived from evenly spaced screws, holes, or flats on a rotating ferrous shaft, or by using Dynalco’s exclusive TT-100 Tach Tape, especially designed for smooth ferrous or nonferrous shafts.

 

Product Family

Magnetic Pickup: intrinsically safe, power zener, extra long reach The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. The speed sensor produces output even at low…
s The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a long reach (4.000 inches) and a 5/8-18 thread. Most CSA-certified magnetic pickups retain that approval only…
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup suitable for mid-speed applications (300 to 500 rpm). It has a long reach (3.500…
This magnetic pickup sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is a sensitive pickup suitable for mid-speed applications (300 to 500 minimum…
This hall-effect sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is designed to sense ferrous material (gear teeth, hole, pin, etc.) for speed…