Speed
Speed

Dynalco - Speed

Reliably monitor and control engines and pumps

Our Catalyst Monitor meets the RICE NESHAP Continuous Parameter Monitoring requirements. It is a low cost solution that comes pre-configured and is quick and easy to install and get running. CSA approved. The…
Magnetic Pickup: intrinsically safe, power zener, extra long reach The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300…
s The low output of this magnetic pickup makes it intrinsically safe and CSA approved. It has a long reach (4.000 inches) and a 5/8-18 thread. Most CSA-certified pickups retain that approval only when used as…
This magnetic pickup has an explosion proof housing which makes it ideal for hazardous environments. It is a sensitive pickup suitable for mid-speed applications (300 to 500 rpm). It has a long reach (3.500…
This magnetic pickup sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is a sensitive pickup suitable for mid-speed applications (300 to 500 minimum…
5/8-18 X 5.250 In Thread X 6.375 In, Hall-Effect Sensor, Senses Gear Teeth, Pin Or Hole (8-32Vdc Input)
This hall-effect sensor is ATEX and IECEx approved for use in hazardous areas: Ex mb (Zone 1, 2) and Ex ia (Zone 0, 1, 2). It is designed to sense ferrous material (gear teeth, hole, pin, etc.) for speed…
The MTH-103E is a newer version of the MTH-103D. The function, package size and wiring are the same although the MTH-103E has a keypad that replaces the old push button, making programming easier and quicker.…
The SPD-100 is a solid- state, intrinsically safe tachometer. The gate time range (0.26 to 5.70 seconds) is field- programmable. It is well- sealed for rugged indoor and outdoor applications. It has 4-digit,…
SST-2000A Speed Transmitter SPEED TRANSMITTER, CSA General Classification and CE approved Receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to…
Reliable, accurate over/under speed protection, transmitter with models upto 4 standard relay set-points and LED or keypad configuration display options. The SST7000 use a pulse or frequency input to provide…
Tachometer / Hourmeter / Monitor Hourmeter with tachometer and 2 analog input channels. Single relay output for alarm/shutdown. CSA approved. Features   Accepts thermocouple, 4-20 mA & DCV…
The UM-600 monitors up to 6 channels of any analog signal plus engine speed and hours and provides an alarm and two different shutdown signal upon user-defined set-points being exceeded. These alarms and…